Mardi 6 mai 2008
L'idée était de faire un paipo avec un planche de bois de pin récupérée.

J'ai donc fini par trouver une planche venant d'un meuble que quelqu'un avait jeté et qui pourait bien venir d'un résineux.

J'ai conservé autant de surface que possible car la planche n'était pas très grande (comparé aux paipos dont j'ai trouvé les dimensions sur le net). Il fait 48 cm X 83 cm. La planche est très rigide.

I wanted to make a paipo with a plank of pine wood and I finaly found a part of a piece of furniture that someone had thrown.
I kept as much material as possible because the plank was small (at least compared to the paipos I saw on the internet). The is board is 18.9" X 33.4". It is very stiff.




J'ai évidé un peu l'avant pour y bloquer les pouces et mieux aggriper la planche.
I tried to make holes on the nose to grip the board better with my thumbs .




Vue du dessous
The underside




J'ai creusé des rails (channels) à l'arrière pour mieux acccrocher dans les virages
I dug channels under the rails at the back for the board to grip during turns

 


Il manque encore un peu de vernis, une petite déco et vivement les vacances pour tester la bête !
Some layers of varnish, a bit of deco and lets taste the water !

article du 06/05/2008
par Thierry publié dans : Autres glisses: longskate windskate cubit paipo...
ajouter un commentaire commentaires (0)    créer un trackback recommander
créer un blog sur over-blog.com - Contact - C.G.U. - Rémunération en droits d'auteur avec TF1 Network - Signaler un abus